Абаласт 1м² платформа вакуумной адсорбции с прямым отверстием V U Polar используется для вибрирующего ножа на ЧПУ - купить

Купить Абаласт 1м² платформа вакуумной адсорбции с прямым отверстием V U Polar, используется для вибрирующего ножа на ЧПУ.

  Parameters: Adsorption Platform Specifications: 700*900*42.5mm Adsorption Platform Thickness: 25/35.5/42.5/53.5mm Panel Aperture: 1.2/1.5mm Panel Hole Distance: 20mm Panel Material: Alloy Aluminum Interface Method: Flange Surface Treatment: Hard Anodized Flatness: <0.15mm Panel Thickness: 2mm Floor Thickness: 2.0mm Suction Caliber: Φ50mm   Features: The vacuum adsorption platform is an aluminum honeycomb structure, made of aluminum alloy material, and the surface has extremely high flatness. In addition to the advantages of aluminum honeycomb panel, such as light weight, high strength, high rigidity, bending resistance, and flexural resistance, this platform has the advantages of both It has the advantages of high flatness, small deflection value, large adsorption force, scratch resistance and abrasion resistance.   1. The Large Surface is High and Flat The board size can be up to 1800*4000mm (more than this size can be spliced). The maximum hard anodizing can be 2000*4000mm. It has excellent flatness and deflection. The flatness is generally controlled within 25 filaments, with a minimum of 10 filaments; the deflection value is less than 10 filaments under an afterburner of 30 kg.   2. Light Weight and Heavy Load Adopt high-quality aluminum honeycomb structure, all use aluminum alloy materials, and the density per square meter is about 25-35 kg. The load-bearing capacity is 30 kg without deformation.   3. High Suction Power and Uniform Suction Power After optimized design, it can not only ensure that the performance of the platform is not affected, but also make the suction force at any position of the platform uniform.   4. Anti-scratch and Abrasion Resistance There are a variety of treatment processes for the board surface, including fluorocarbon PVDF powder spraying, anodizing, and hard oxidation, which can be selected according to actual needs. Among them, the hard oxidation process is the most scratch-resistant and wear-resistant, and its surface hardness can reach HV500- 700.   5. Customer Customization It can be customized according to customer needs, whether it is platform size, aperture and hole distance, suction area, suction aperture, number of suction ports, interface mode or any partition, single suction or no suction, etc. can be customized.  

---