1.5-3.5MM BGA Desoldering Braid Solder Wire CP-3515 Suction-line 1.5m Length Wick/Soldering Accessory Инструменты - купить

Купить 1.5-3.5MM BGA Desoldering Braid Solder Wire CP-3515 Suction-line 1.5m Length Wick/Soldering Accessory | Инструменты

 

 

Specification: Brand new Material: Copper Color: as shown in picture Length: approx. 1.5m  Width: approx. 1.5-3.5mm Using refined from pure copper and special chemicals. Anti-corrosion, good thermal conductivity. Used in absorbing excess solder. The tin effect is very good, absorb and clean. Easy to use.   How to Use: 1.Place the desoldering wick over the solder to be removed.then push the heated soldering iron tip onto the desoldering wick,The solder will be absorbed 2. Remove the desoldering wick after the solder has been absorbed 3. Cut off the used section of the wick using nippers 4. Repeat steps1,2 and 3 if the solder is not removed completely.Absorbability may differ depending on the type of solder.Sn63% and 60% (tin content) have good absorbability. Note: Please allow 1-5cm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.         Package included: 1 x CP-3515 Desoldering Braid