Nema34 8N.m Closed Loop Stepper Motor Driver Kit Hybrid Step Servo Drive+ 3M Encoder Cable& Power for Engraving Machine Обустройство - купить

Купить Nema34 8N.m Closed Loop Stepper Motor Driver Kit Hybrid Step Servo Drive+ 3M Encoder Cable& Power for Engraving Machine | Обустройство

Nema34 8N.m Closed Loop Stepper Motor Driver Kit ,Hybrid Step Servo Motor Drive+ 3M Encoder Cable& Power for Engraving Machine  

Packing list  

1PCS HSM series hybrid servo motor 86HSM80-E1

1PCS HSM series hybrid servo motor drive H2-758

1PCS 3- meters of encoder cable

1PCS 450W 70VAC Ring transformer (YD-450-70S)

 

HSM Series General Introduction

HSM series hybrid servo motor provides position and speed feedback, adopts the latest vector closed-loop control technology, and overcome the problem of losing the stepping of the open-loop stepping motor to improve the machining speed and precision. The high speed performance of the motor can be improved obviously through effective current control.It is an ideal choice for the performance upgrade of stepping drive system and the cost optimization of ac servo drive system.

Product  Applications

It has been widely used in Engraving machine, wire stripping machine, marking machine, cutting machine, laser lighting, plotter, CNC machine tool, flying needle testing machine, automatic assembly equipment, etc. It is very good to use in devices with small noise and high speed.

 

Hybrid Servo Drive H2-758

Features:

Adopt 32 bit DSP IC and advanced vector closed-loop control technology,

With trapezoidal wave test function,

Automatic adjustment of output current (0-8a range),

Can drive 86 series hybrid servo motor,

Microstepping setting range:200-51200

With Six digital tube display for setting parameters and monitoring motor running status.

 

Electrical Specifications:

Parameter Min Typical Max Unit Continuous Output Current 0 - 8 A Input Power Voltage 50 75 80 VAC Logic Input Current 7 10 20 mA Pulse Frequency 0 200 300 kHz Isolation Resistance 100 - - MΩ Logic Signal Current - - 100 mA

Using environment: avoid dust, oil mist and corrosive gas, 0-40 Celsius degree, 40%-90% RH (humidity).

Size: 54*130*158mm(Width*Depth*Height)

Weight: 1200g

 

Ring transformer Specifications YD-450-70S

Input voltage:220V/230V/240V (190V-250V)

Output voltage: 70V/73V/76V(60-79V)

Total height:68mm (included the top screw)

Outer diameter: 130 mm

Line: Each side has two line,300mm length.

 

Hybrid Servo Motor   86HSM80-E1  

Features:

Built-in 1000/5000 line Incremental photoelectric encoder,

High output torque

Low heating and low energy consumption.

It run smoothly, and with low vibration noise.

Fast response speed, suitable for frequent start and stop.

 

Electrical Parameters:

Model: 86HSM80-E1

Using the environment: Temperature: - 10 ~ 50 Celsius degree; Humidity: 85% MAX

Insulation class:B

Insulation resistance:100Mohm MIN 500Vdc

Withstand voltage: 500Vac 1 min

Radial runout: 0.025mm MAX (load 5N)

The axial runout:0.075mm MAX (load 10N)

Phase Step Angle NEMA FRAME Rated Current(A) Holding Torque Motor length (L) Two phase 1.8 degree 35 86mm 6.0A 8.0N.M/1143 oz-in 126mm

  

 

Dimension and Connection：