Mini Camping Flashlight High Power Rechargeable Led Flashlights COB Home Lighting Focusing Telescopic Adjustment Work Lamp Лампы и - купить

Купить Mini Camping Flashlight High Power Rechargeable Led Flashlights COB Home Lighting Focusing Telescopic Adjustment Work Lamp | Лампы и

Instructions for the use of lithium batteries 1. Lithium battery characteristics: Lithium battery and mobile phone battery charging mode is completely different; lithium battery has no memory, can be charged at any time, but do not overcharge and overdischarge. 2, the first charge for 6-8 hours, after the green light on the charger is OK, not overcharge. Charge the battery when the light is dimmed to a low level, otherwise the overdischarge of the battery can easily cause irreparable damage. 3, special reminder to use the "three anti-charge" charger with anti-overcharge, anti-reverse connection, anti-short circuit. 4, do not use the battery for a long time, should be full of electricity storage, normal recharge and discharge in about three months.  Instructions for using a flashlight 1, the flashlight in use, according to the flashlight voltage and battery requirements, do not use indiscriminately, in case of burning out the circuit board, different models, different voltage battery do not use at the same time. 2. In use, turn off the flashlight when the brightness of the flashlight changes significantly to prevent the battery from being over-discharged. 3, heat dissipation skills: flashlight in the use of the process, to ensure heat dissipation. When the battery is charged, it is best to use the second gear first, so that the flashlight and battery can be extended life! Do not shine the Flashlight directly into the eyes, so as not to affect your eyesight, especially children. Troubleshooting 1, check the battery: make sure the battery has electricity and install the battery in the right direction, can not use different brands of batteries, old and new batteries can not be mixed.

2. Check the tail cover: Make sure the switch is tightened and contacted well, make sure that the copper pillar of the tail cover contacts well with the metal sheet of the pressure ring of the tail cover, and pay attention to whether the lamp holder Is loose.