110V Heat Gun Electric Power Tool Hot Air 300W temperature DIY soft ceramic US regulatory plug rubber stamp convex Инструменты - купить

Купить 110V Heat Gun Electric Power Tool Hot Air 300W temperature DIY soft ceramic US regulatory plug rubber stamp convex | Инструменты

Features and specifications 

Hot air gun, soft pottery, heat shrinkable sheeting tool
Size: Body 24cm
Colors: White, Black
Rated Power: 300W
Rated Voltage: 110V
Product Features: Heating tool for heating embossed powder and heat shrinkable sheet.
Instructions:
1. Plug in the power and turn on the switch.
2. Maintain a distance of 3-5cm from the work and heat it at an angle of about 45 degrees until the work is completed.
3. Turn off the power to be cooled
Note: The heat gun temperature is high and it is burnt when used.
Usually do some small soft clay works can be blown directly with a hot air gun. After baking, use a hot air gun to blow for a few minutes at high temperature. Not only can it be hardened but also brightened.
This heat gun can't be tempered. In theory, the muzzle can reach 200° in a few seconds. Therefore, when used to blow soft clay, do not stay in a place to blow, do not blow for a long time, do not stop for more than 10 minutes and then blow again, the angle is about 45 degrees to prevent heat from sucking.

 
 Payment

Shipment&Delivery

Return&Refund

 Feedback