Муфта подшипника из углеродистой стали для самодельного мотора комплектующие варианты внутреннего диаметра вала: 4/5/6/8/10/12 мм удлинительный тип - купить

Купить Опорная муфта из стали 45 для мотора DIY, детали, внутренний диаметр соединительного вала 4/5/6/8/10/12 мм, удлинитель.

DescriptionThe rigid coupling is a 90-degree fastening design and is fastened by four machine-meter screws!Made of pure steel, the hole diameter error is ±0.05mm, through hole design, the length of the two holes each occupies half of the coupling!Four machine screws are provided for each coupling, and a tightening wrench is provided for each order!Size description:The following types, the outer diameter of the coupling is 16mm, and the length is 22mm:4-4 means the hole diameter on one side is 4mm, and the hole diameter on the other end is 4mm; (the side holes use M4 machine screws)5-5 means the diameter of one side is 5mm, and the other end is 5mm; (the side holes use M4 machine screws)5-8 means the diameter of one side is 5mm, and the other end is 8mm; (the side holes use M4 machine screws)6-6 means the diameter of one side is 6mm, and the other end is 6mm; (the side holes use M4 machine-meter screws)6-8 means the diameter of one side is 6mm, and the other end is 8mm; (the side holes use M4 machine screws)8-8 means that one side has a hole diameter of 8mm and the other end has a hole diameter of 8mm; (the side holes use M4 machine screws)6-10 means the diameter of one side is 6mm, and the other end is 10mm; (the side holes use M4 machine screws)8-10 means that one side has a hole diameter of 8mm and the other end has a hole diameter of 10mm; (the side holes use M4 machine screws)10-10 means the hole diameter on one side is 10mm, and the hole diameter on the other end is 10mm; (the side holes use M4 machine-meter screws)The following types, the outer diameter of the coupling is 16mm, and the length is 22mm:6-12 means the diameter of one side is 6mm, and the other end is 12mm; (the side holes use M5 machine-meter screws)8-12 means that one side has a hole diameter of 8mm and the other end has a hole diameter of 12mm; (the side holes use M5 machine screws)10-12 means the hole diameter is 10mm on one side, and the hole diameter on the other end is 12mm; (the side holes use M5 machine-meter screws)12-12 means that one side has a hole diameter of 12mm, and the other end has a hole diameter of 12mm; (the side holes use M5 machine-meter screws)For all size materials, please refer to the actual product received. If you have any questions, please contact our customer service before purchasing.

---