Контроллер для гравировки и фрезеровки DCSV3.1 с возможностью работы в автономном режиме на 3/4 оси поддержкой G-кода включая ручное управление через ручку MPG от TECNR - купить

Купить DCSV3.1 3 / 4 Axis G Code CNC Offline Stand Alone Controller For Engraving Milling Machine DDCS V3.1 + MPG Handwheel TECNR |

 

NOTE:   NO HOT-PLUG   When DDCSV3.1 is powered on, please do not hot-plug to prevent the IC chip from being damaged.       Packing List A(DDCS V3.1+MPG)   1 x DDCSV3.1 CNC Offline Controller  （3/4 Axis Optional）   1 x 4 Axis MPG handwheel   1 x 4GB USB Flash Disk   1 x USB Extension Cable + Accessories   1 x Mounting bracket

 

Packing List B(Only DDCSV3.1)

1 x DDCSV3.1 CNC Offline Controller  （3/4 Axis Optional）

1 x 4GB USB Flash Disk

1 x USB Extension Cable + Accessories

1 x Mounting bracket

 

Specifications:

Standalone Motion Controller;

16 optoisolated digital inputs, 3 optoisolated digital outputs

Analog spindle control 0-10V spindle control (can be modified as PWM output);

3 axis motor control, max 500 kHz per axis;

ARM9 main control chip;

FPGA core algorithm chip;

4.3 inches TFT screen, resolution ratio: 480x272;

17 operation keys;

18V-32V power input, minimum 0.5A;

USB flash disk supports for G code file input;

1GB internal memory;

MPG port for our MPG with digital display. Many other MPGs also supported;

Jog function for each axis (continuous, step, defined distance;

Support the operation of quickly specifies the running position;

Support for “Power Cut” recovery. Data is automatically saved.

 

 

 

---