3Axis Nema 34 Stepper Motor 1232OZ-IN 5.6A & stepper motor driver DM860A 3pcs power CNC PLASMA &Mill Обустройство дома - купить

Купить 3Axis Nema 34 Stepper Motor 1232OZ-IN 5.6A & stepper motor driver DM860A 3pcs power CNC PLASMA &Mill | Обустройство дома

We are looking for distributors in the world,if you are intrested in our programme,please contact us!Let's grow together!!!

What's in Box?

1. 3 pcs Nema 34 stepper motor 1232 oz.in bipolar

2. 3 pcs Stepper motor driver, 7.8A ,256  Micsteps,replacing M860

3. 3pcs Power Supply  350W-60VDC/5.8A

4. 1 pc  Breakout Board

More quatities, More discounts!!

Detailed information :

1. Nema 34 stepper motor:

Technical Specifications

Part No.:                    34HS1456

Frame Size:                  NEMA34

Step Angle:                  1.8 degree

Voltage:                       3.08V

Current:                       5.6A/phase

Resistance:                  0.55 Ohm/phase

Inductance:                  5.5 mH/phase

Holding torque:            8.4N.m      1200oz-in     

Rotor inertia:                2700g-cm2

Number of wire leads:  4

Weight:                        3.8 kg

Length:              118MM

The shaft of the stepper motor is 14MM,the length of the shaft is 37MM.

If you need the detailed mechanical dimensions ,you can contact with the me any time.

BLUE         B-

RED           A+

GREEN      A-

YELLOW    B+

2.Stepper motor driver DM860A:

Introduction:

DM860A  is a type  of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.Features:l         High performance, low pricel         Average current control, 2-phase sinusoidal output current drivel         Supply voltage from 24VDC to 80VDCl         Opto-isolated signal I/Ol         Overvoltage, under voltage, overcorrect, phase short circuit protectionl         14 channels subdivision and automatic idle-current reductionl         8 channels output phase current settingl         Offline command input terminall         Motor torque is related with speed, but not related with step/revolutionl         High start speedl         High hording torque under high speed3. Power Supply: The power is 350W, the output voltage/current is 60VDC/ 5.8A. 4. Breakout Board:

Built in DB25 male connector.

DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.

DB25 Input Pin: P10,P11,P12,P13,P15.

DB25 GND Pin: P18-P25.

Power supply: +5V DC.

Built in C-class Optical-coupler.

High quality with Surface-mount Tech.

Our Stepper Motors are used on small to mid-sized CNC mills & milling machines, CNC lathes, Pick-n-place machines, Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters. These motors have been used in precision telescope positioning systems and robots.

   Hello,dear friend,thanks for you visiting my store very much.if you have any questions or need more detailed info of our goods,please feel free let me konw,I'll try my best to support you,thanks.

Wish you have a good shopping!:-)